Honeywell International Inc. 75EL0N Manuale Utente

The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the 
back panel of the device. See 

on page 3-8 for additional information on battery storage, use, and disposal.

Important: Removing the battery from the terminal erases all non-persistent memory. Always place the terminal in Suspend 

mode before removing the battery. For information on how to remove the battery from the terminal, see 

Dolphin terminals ship with the battery significantly discharged of power. After installing the battery in the terminal, charge 
the battery with a Dolphin 75e compatible charging peripheral for a minimum of 4 hours for the standard battery pack or 6 
hours for the extended battery pack. When using the 70e-USB Charge/Communication cable to charge from a 500mA 
USB port on a host device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the 
extended battery.

3-10 for additional information.

Dolphin 75e model terminals are designed for use with the following charging devices and cables: 70e-HB, 70e-CB, 
70e-EHB, 70e-NB, 70e-MB, 70e-MC, and 70e-USB ADAPTERKIT. See pages 

 for additional information on 

peripherals and accessories.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell 
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet 
components may cause damage not covered by the warranty.

!

!

Preliminary Draft, Not for Release - Please Review 2-3-2015