Adtran 1700412E11 User Manual
Unit Installation
NetVanta 150 Wireless Access Point ABG Hardware Installation Guide
22
Copyright © 2006 ADTRAN, Inc.
61700412E1-34A
3.
UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics such as wall
mounting and supplying power to the unit.
mounting and supplying power to the unit.
Installing the Antennas
The NetVanta 150 unit ships with two dual-band RP-SMA detachable antennas. These must be installed
before wall mounting the unit.
before wall mounting the unit.
Mounting Options
The NetVanta 150 unit can be installed in a wallmount or tabletop configuration. The following section
provides step-by-step instructions for wall mounting.
provides step-by-step instructions for wall mounting.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
lightning storm.
Maximum recommended ambient operating temperature is 50
°
C.
Instructions for Attaching the Antennas
Step
Action
1
Place either of the two antennas directly onto the antenna port on the rear panel labeled
Antenna 1. See Figure 2 on page 21 to locate the ports on the rear panel.
Antenna 1. See Figure 2 on page 21 to locate the ports on the rear panel.
2
Twist the antenna onto the threads until it is secure.
3
Repeat step 2 with the second antenna, attaching it to the Antenna 2 port.
4
Once both antennas are secured, the antennas may be flexed at the joint to increase reception.