Adtran TRC6410 User Manual
TRACER 6000 Series Integrated System Manual
Section 4 Network Turnup Procedure
612806420L1-1D
Copyright © 2005 ADTRAN, Inc.
51
Figure 4. 23-inch Rackmount Illustration
8.
INSTALLING MODULES
Figure 5 shows the slot numbering designation as viewed from the rear of the TRACER 64x0. The
functionally identical option slots only accept TRACER 6000 Series modules.
functionally identical option slots only accept TRACER 6000 Series modules.
Figure 5. TRACER 64x0 Network Module Slot Designation
Access modules are intended to be serviced by qualified service personnel only.
TRACER 64x0 modules are not hot swappable. Remove power from the system before
installing or removing the module.
installing or removing the module.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
TR
AC
ER
64
20
MODULE 1
MODULE 2