JTECH Communications Inc. SERIES2600 User Manual
JTECH UHF Desktop Transmitter Installation and Operation Guide 320115K
Page 4
Transmitter Function Menu
The Desktop Transmitter functions are accessible from a function menu that is
accessed by pressing the * key. In an effort to reduce potential system problems
due to erroneous changes in system settings, most of this menu is password
protected. The factory default password is “1234.” Most commonly used
transmitter functions are also available via 4-digit code access, codes which are
supplied on the magnetic guide that is shipped with your transmitter. A detailed
review of these functions appears in the appendix of this manual.
The Desktop Transmitter functions are accessible from a function menu that is
accessed by pressing the * key. In an effort to reduce potential system problems
due to erroneous changes in system settings, most of this menu is password
protected. The factory default password is “1234.” Most commonly used
transmitter functions are also available via 4-digit code access, codes which are
supplied on the magnetic guide that is shipped with your transmitter. A detailed
review of these functions appears in the appendix of this manual.
Pagers
The GuestAlert and PeopleAlert systems support RapidCall vibration/tone
pagers, RapidCall Numeric pagers, the popular Glowster vibe/flash pagers and
the distinctive new CommPass pagers. Your pagers were programmed by
JTECH to meet your requirements as confirmed with your Account Sales
Executive or Corporate Sales Representative.
Vibe/Tone Pager
There are a number of optional programming modes available with the
RapidCall
The GuestAlert and PeopleAlert systems support RapidCall vibration/tone
pagers, RapidCall Numeric pagers, the popular Glowster vibe/flash pagers and
the distinctive new CommPass pagers. Your pagers were programmed by
JTECH to meet your requirements as confirmed with your Account Sales
Executive or Corporate Sales Representative.
Vibe/Tone Pager
There are a number of optional programming modes available with the
RapidCall
vibe/tone pagers. The pager is programmed with one primary ID
number and there are options to also program that same pager to support groups
1, 2 and 3 or multiple vibrations.
The option to enable the RapidCall vibe/tone pager to support groups 1, 2 and 3
pre-programmed from the factory allows all pagers identified within these groups
to be alerted with a single transmission.
The option to enable the RapidCall vibe/tone to support multiple vibrations pre-
programmed from the factory allows all pagers identified with a multiple vibe
option to be alerted with a single, double or triple vibration as follows:
1, 2 and 3 or multiple vibrations.
The option to enable the RapidCall vibe/tone pager to support groups 1, 2 and 3
pre-programmed from the factory allows all pagers identified within these groups
to be alerted with a single transmission.
The option to enable the RapidCall vibe/tone to support multiple vibrations pre-
programmed from the factory allows all pagers identified with a multiple vibe
option to be alerted with a single, double or triple vibration as follows:
1 vibration = 1xxx#
2 vibration = 2xxx#
3 vibration = 3xxx#
2 vibration = 2xxx#
3 vibration = 3xxx#
(x meaning the pager id number or in instances where the pager id number is less than
3-digits the x is replaced with a zero (0))
3-digits the x is replaced with a zero (0))
Example:
Send 2 vibe alert to pager id 1 = 2001#
Send 3 vibe alert to pager id 2 = 3002#
Send 2 vibe alert to pager id 12 = 2012#
Send 3 vibe alert to pager id 224 = 3224#
Additionally, these pagers may be a member of one of the dynamic groups. The
possible pager numbers are 1 - 9950. To page all vibe/tone pagers at once (All
Call feature), enter “9998#”on the keyboard or the phone. For pagers supporting
over-the-air shut down (RapidCall vibe/ tone), turn off all pagers by entering
“9991#” on the keyboard or the phone.
possible pager numbers are 1 - 9950. To page all vibe/tone pagers at once (All
Call feature), enter “9998#”on the keyboard or the phone. For pagers supporting
over-the-air shut down (RapidCall vibe/ tone), turn off all pagers by entering
“9991#” on the keyboard or the phone.