Wacom DTI-520 User Manual

To insert a new nib:

To remove the old nib:

Prevent your children from swallowing the pen nib or side switch. The pen nib 
or side switch may accidentally be pulled out if children are biting on them.

Slide it straight into the barrel of 
the pen. Firmly push the nib until it 
stops. The new nib will slide into the 
correct position.

Clasp it with a pair of tweezers 
or similar instrument and pull 
the old nib straight out of the 
pen.

T

o clean the DTI-520 casing, use a soft cloth with mild detergent (such as dish 

washing liquid) diluted with water.  Do not use paint thinner, benzine, alcohol, or 
other organic solvents to clean DTI-520 casing or pen.
To clean the display screen, use a soft, dry cloth.  If necessary, slightly 
moisten the cloth with water and try again.  When cleaning, apply only a light 
amount of pressure to the display screen  and do not make the surface wet.  Do 
not use detergent to clean the display screen; this may damage the coating on the 
screen.  Please note that damage of this kind is not covered by the manufacturer's 
warranty.

The pen tip will wear with normal use. When the nib gets too short, you can 
replace it with one of the extra nibs that came with your pen. If the pen tip wears 
and becomes angular, it may damage the coating on the cover glass of DTI-520 
Interactive Pen Display. To avoid this, periodic nib replacement is recommended.