Proxim Wireless Corporation L49U24U50 User Manual
Command Line Interface (CLI)
AP-4000/4000M/4900M User Guide
Parameter Tables
205
–
–
- Filter IP packets based on TCP/UDP port
•
–
- Enter the list of IP addresses that will receive alarms from the AP
–
- Configure the AP to send Syslog information to network servers
•
–
- Used to help prevent network loops
–
- Set threshold for number of broadcast packets
–
- Enable or disable peer to peer traffic on the same AP
–
- Redirect traffic from wireless clients to a specified MAC address
•
–
- Configure RADIUS Servers and assign them to VLANs.
•
- Access Point security settings
–
–
- Enable and configure Rogue Scan to detect Rogue APs and clients.
–
- Configure 802.1X Supplicant Timeout parameter
–
- Disable or enable hardware configuration reset and configure a configuration
reset password.
–
encryption and authentication mechanisms.
•
- Enable the configuration of multiple subnetworks based on VLAN ID and SSID.
•
–
- Enable or disable the Inter-Access Point Protocol
–
- Enable and configure Wireless
Multimedia Enhancement/Quality of Service parameters, QoS policies, mapping priorities, and EDCA parameters.
Apply a configured QoS policy to a particular SSID.
Apply a configured QoS policy to a particular SSID.