Command Technologies Inc HF2500MAGNUM User Manual

 

 
Band Coverage:  160, 80, 40, 20, 17, and  15 meter amateur radio bands, 
                                 12 and 10 meter Export model; also useable in  U.S.A.  
 

 

                      upon proof of proper license. 

 
Types of Emissions:  SSB, FM, CW, AM, RTTY, SSTV 
 
Driving Power Required: 40 to 60 watts nominal at rated continuous  
                                              carrier output 
 
Maximum Output Power: 1500 watts Continuous Carrier,  1500 watts  CW, 
                                                1500 watts Single Side Band 
 
Duty Cycle: 100 percent  in Amateur service at 1500 watts output power 
 
Harmonic Suppression: Exceeds all F.C.C. Requirements 
 
Keying: Requires contact closure of sinking +20 v dc at 300 ua. dc. 
 
Input Impedance: 50 ohms unbalanced 
 
Output Impedance: 50 ohms unbalanced: SWR 2:1 or less 
 
Metering: Plate Voltage & Plate Current (switchable), Grid Current (continuous) 
 
A.L.C.:  Negative  going, adjustable from rear panel 
 
Front Panel Controls: Plate Voltage & Current Switch, On/Off Switch, Tune,  
                                          Load, Band Selector Switch 
 
Rear Panel Controls: Tuned Input Adjustment, A.L.C. Adjustment, R.F. Input, 
                                         R.F. Output A.L.C. Output, Keying, +12v dc Auxiliary 
                                         Source, Ground Connection, Line Cord, Fuse 
 
Tube Complement: Two Eimac 3CPX800A7 Ceramic/Metal Triodes 
 
Power Requirement: 200 / 234 Vac, 50/60 hz,  20 amperes