Zebra Technologies Corporation MD-ZLAN11G User Manual
Introduction to the HC100
Media Cartridges and Wristbands
Media Cartridges and Wristbands
20
61207L-001 Rev. A
HC100 User Guide
4/23/08
Media Cartridges and Wristbands
Different sizes, colors, and closure types of wristbands are available in recyclable media
cartridges. This information appears on the media cartridge label. The wristbands feature an
antimicrobial coating to help protect against the spread of S. aureus, P aeruginosa, E. coli, and
MRSA.
cartridges. This information appears on the media cartridge label. The wristbands feature an
antimicrobial coating to help protect against the spread of S. aureus, P aeruginosa, E. coli, and
MRSA.
For ordering information, see Contacts
. Only Genuine Zebra™ supplies will work
with your printer.
Media Cartridges
View the level of media remaining in the cartridge through the wristband supply window on
the left side of the media cartridge (
the left side of the media cartridge (
). Wristbands exit through a slot on the front of the
media cartridge.
Figure 6 • Media Cartridge
Media cartridges cannot be reused or refilled. Dispose of media cartridges in accordance with
your local regulations or standards. For information on Zebra's recycling program, see
your local regulations or standards. For information on Zebra's recycling program, see
1
Wristband supply window
2
Wristband exit area
Important •
Forcibly pulling a wristband from the media cartridge can damage the cartridge.
A damaged cartridge will not work. If a wristband sticks out partially from a cartridge, use
scissors to cut off the exposed part so that it is flush with the cartridge. Do NOT pull the
remainder of the wristband out of the cartridge. The printer will eject the partial wristband
after the cartridge loads properly.
scissors to cut off the exposed part so that it is flush with the cartridge. Do NOT pull the
remainder of the wristband out of the cartridge. The printer will eject the partial wristband
after the cartridge loads properly.
1
2