Kiddesigns Inc BE278 User Manual
BE-278
BE-278 is a high quality’s 2.4GHz cordless video camera system, got the most life
like’s image and clarity sounds. The transmission range is up to 10 meter (depend on
environment) so you can take image all around your house freely.
like’s image and clarity sounds. The transmission range is up to 10 meter (depend on
environment) so you can take image all around your house freely.
Getting Started
Camera
Battery Installation
1. Unscrew the battery door by screwdriver.
2. Remove the battery door and insert 6 “AA” batteries, checking the + and – ends of the batteries.
3. Close the battery door and screw it back.
We recommend
1. Unscrew the battery door by screwdriver.
2. Remove the battery door and insert 6 “AA” batteries, checking the + and – ends of the batteries.
3. Close the battery door and screw it back.
We recommend
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Removing batteries if unit is not used for more than 30 days.
Power Connection
Important: Please use the power adaptor (DC 12V 300mA) came with the unit only.
1. Plug in the power adaptor came with the unit to the wall outlet and the base unit.
2. Turn on the base unit by switching the POWER ON/OFF switch to ON. The green LED on the
Important: Please use the power adaptor (DC 12V 300mA) came with the unit only.
1. Plug in the power adaptor came with the unit to the wall outlet and the base unit.
2. Turn on the base unit by switching the POWER ON/OFF switch to ON. The green LED on the
base unit will be turned on.
Hooking to TV
NOTE: If you want to record image to videotape, you must connect BE-278 to VCR. But if you just
want transmit image to TV, you can just connect BE-278 to TV only.
want transmit image to TV, you can just connect BE-278 to TV only.
1. Turn off both your TV and the BE-278 base unit.
2. Connect the yellow plug to your TV’s VIDEO IN jack and the white plug to AUDIO IN.
3. To check the connection, please turn on your TV and both BE-278 base and camera. Switch TV to
2. Connect the yellow plug to your TV’s VIDEO IN jack and the white plug to AUDIO IN.
3. To check the connection, please turn on your TV and both BE-278 base and camera. Switch TV to
LINE IN mode than you should see picture capturing by the camera.
Hooking to VCR
NOTE: Please make sure the connection between your TV and VCR is working properly before install
the BE-278.
the BE-278.
1. Turn off your TV, VCR and the BE-278 base unit.
2. Connect the yellow plug to your VCR’s VIDEO IN jack and the white plug to AUDIO IN.
3. To check the connection, please turn on your TV, VCR and both BE-278 base and camera. Switch
2. Connect the yellow plug to your VCR’s VIDEO IN jack and the white plug to AUDIO IN.
3. To check the connection, please turn on your TV, VCR and both BE-278 base and camera. Switch
both TV and VCR to LINE IN mode and than you should see picture capturing by the camera.