Motorola Mobility LLC T56KT1 User Manual
Chapter 2: Hardware Interface Description
December 15, 2009
G30 - Module Hardware Description
37
Advanced Mode
Advanced audio mode utilizes G30's unique set of AT commands for advanced audio
programming. The expanded AT command set enables to define a specific audio path and setting,
which are not part of the default configuration, for each type of audio sound (speech, DTMF
tones, rings and alerts).
programming. The expanded AT command set enables to define a specific audio path and setting,
which are not part of the default configuration, for each type of audio sound (speech, DTMF
tones, rings and alerts).
Unlike basic audio mode, which provides predefined audio paths, the advanced audio mode
provides full control over the G30 audio interface and its parameters, and differentiates between
each type of audio sound.
provides full control over the G30 audio interface and its parameters, and differentiates between
each type of audio sound.
describes the advanced mode audio programming features. These features are only a
part of the complete advanced audio AT command set.
Audio Programming Interface
The G30 incorporates a unique audio programming interface, through AT commands, which
controls the following audio features:
controls the following audio features:
•
Audio Path - Defines the input and output devices for speech, DTMF tones, rings and alerts.
•
Audio Gain - Defines the amplification (gain) level for input and output audio devices.
•
Audio Algorithm - Defines the speech processing features for voice calls.
Table 2-14: Advanced Mode Commands
Command
Description
AT+MAPATH
Sets the input device for voice, and the output
devices for voice, DTMF tones, rings and
alerts.
devices for voice, DTMF tones, rings and
alerts.
AT+MAFEAT
Enables and disables the speech processing
algorithms - Echo suppression, noise sup-
pression and sidetone.
algorithms - Echo suppression, noise sup-
pression and sidetone.
AT+MAVOL
Sets the gain (amplification) level of the
selected analog output device.
selected analog output device.
AT+MMICG
Sets the gain (amplification) level of the
selected analog input device.
selected analog input device.
AT+MMICV
Sets the MIC bias voltage.
AT+MADIGITAL
Switches between analog and digital audio
paths.
paths.