Proxim AP5C User Manual
13
Chapter 2
Installation
The Harmony 802.11a Access Point requires a Harmony Access Point (AP) Controller.
The AP Controller must be installed on the network before the Access Point can be
installed and configured. See the User’s Guide that came with your Harmony AP
Controller for instructions on how to install and configure Access Points.
The AP Controller must be installed on the network before the Access Point can be
installed and configured. See the User’s Guide that came with your Harmony AP
Controller for instructions on how to install and configure Access Points.
Note:
The AP Controller must have firmware version 2.0 or greater installed to sup-
port the Harmony 802.11a Access Point. Confirm that the AP Controller has
the latest firmware version before installing the 802.11a Access Point.
port the Harmony 802.11a Access Point. Confirm that the AP Controller has
the latest firmware version before installing the 802.11a Access Point.
Pre-installation Considerations
Regulatory Warnings
FCC Guidelines
It is the responsibility of the installer and users of the Harmony 802.11a Access Point
to guarantee that the antenna is operated at least 20 centimeters from any person.
This is necessary to insure that the product is operated in accordance with the RF
Guidelines for Human Exposure which have been adopted by the Federal
Communications Commission.
to guarantee that the antenna is operated at least 20 centimeters from any person.
This is necessary to insure that the product is operated in accordance with the RF
Guidelines for Human Exposure which have been adopted by the Federal
Communications Commission.