Davis Instruments DWW765Y User Manual

21

Refer to the following illustration to install the repeater on a pole:

1. While holding the shelter against the pole, place a U-bolt around the pole and 

through the two holes on at the top of the shelter. 

2. Place a flat washer, a lock washer and a hex nut on each of the bolt ends. 

3. Using an adjustable wrench or 7/16" wrench, tighten the nuts.

4. Place the second U-bolt around the pole and through the two holes at the bot-

tom of the shelter. 

5. Put a flat washer, a lock washer, and a hex nut on each bolt end, and tighten 

the hex nuts.