Lutron Electronics Company Inc 0021 User Manual

The RF Tabletop Keypads are for use with HomeWorks
Interactive  systems. The keypad buttons are pro-
grammed with a personal computer using the
HomeWorks Interactive Programming Utility. 

Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks Interactive RF Processor. 

Use only high quality alkaline batteries, two (2) size AAA,
1.5V. 

Caution - Do not use rechargeable batteries.
Using improperly rated batteries could damage
the RF Tabletop Keypad.

Use only the DC adapter provided by Lutron with
your Tabletop RF Keypad. 

Caution - Using a DC adapter not rated for the
following specifications could damage the con-
trol and possibly overheat the DC adapter.

• Input: AC 120/127V, 50/60Hz
• Output: DC 9V/300mA Class 2

Clean control with a soft damp cloth only. Do not
use any chemical or abrasive cleaners.

Operate in ambient temperatures between 0°C (32°F)
and 40°C (104°F).

Do not paint controls.

RF Keypads must be located within 30 feet (9m) of
an RF Signal Repeater or an RF Processor. Multiple
repeaters may be necessary to provide adequate
coverage.

RF Keypads do not function until they are addressed
and programmed. See the HomeWorks Interactive
Programming Utility online help.