KAPSCH TRAFFICCOM CANADA INC. 802295 User Manual

JANUS

Multi-Protocol Reader Ver. 2: Operating Instructions

Confidential

UM 360450-210 Revision: A7

Page

45 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX

10/31/2013 7:56

Kapsch TrafficCom

4. Log out (see Logging out of the CTM web interface, page 43).

5. Select

Change Password from the navigation sidebar.

6. Enter your user name and compose a password.

Note: This password does not become your new password.

7. Change your password (see Changing your password on page 44).
Result: Your password resets.

Configuring the Reader to recover automatically to the primary side

The Reader can be configured to automatically activate the primary side once a failure causing a

switchover to the secondary side has cleared.
Prerequisites: Connect the service laptop to the Reader configuration port to access the CTM web

interface. Refer to Connecting a service laptop to the Reader, page 40.
Note: You must have Advanced User permissions.

1. Set the SPM redundancy mode switch to the

AUTO position.

2. From the CTM web

Main Page, select the Configuration link on the left panel of the screen.

Result: The following Configuration page appears.

3. Select the

Auto Recovery To Prime check box.

4. Press

Enter to accept the selection.