Silverstone ST85ZF SST-ST85ZF User Manual
Product codes
SST-ST85ZF
Description:
Electrical Specification
SilverStone Technology Co., Ltd.
Subject:
SilverStone Technology
Model: ST85ZF
Switching Power Supply
Document No.:
ES-850-ZEUS-01
File Name: ST85ZF.doc Page : 9
4.3 Short Circuit Protection
The power supply shall shut down in a latch off mode when the output voltage is short circuit.
4.4 No Load Operation
When the primary power is applied, with no load on any output voltage, no damage or hazardous
conditions shall occur.
conditions shall occur.
5. Environmental Requirements
5.1 Temperature
Operating Temperature Range:
0
°C ~ 50°C (32°F~ 122°F)
Non-Operating Temperature Range:
-40
°C ~ 70°C (-40°F~ 158°F)
5.2 Humidity
Operating Humidity Range:
20% ~ 90%RH non-condensing
Non-Operating Humidity Range:
5% ~ 95%RH non-condensing
5.3 Altitude
Operating Altitude Range:
Sea level to 10,000 ft
Non-Operating Altitude Range:
Sea level to 40,000 ft
5.4 Mechanical Shock
The power supply (non-operating) shall not be damaged during a shock of 50G with an 11 mS half sin wave,
non-operating. The shock to be applied in each of the orthogonal axes.
non-operating. The shock to be applied in each of the orthogonal axes.
5.5 Vibration (Operating and Non-operating)
The power supply shall be subjected to a vibration test consisting of a 10 to 300 Hz sweep at a constant
acceleration of 2.0g for duration of one (1) hour for each of the perpendicular axes X, Y and Z,
0.1
acceleration of 2.0g for duration of one (1) hour for each of the perpendicular axes X, Y and Z,
0.1
octave/minute
. The output voltages shall remain within specification.