Yaesu Musen Co. Ltd. 30143X3D User Manual
GX3000S
Page 32
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
6. To exit the FOG HORN mode, press the [PA/FOG] or [CLR] key.
10.14 NAVIGATION INDICATION
The transceiver has the ability to display Time, SOG, COG, as well as the posi-
tion (LAT/LON), when connected to a GPS receiver.
tion (LAT/LON), when connected to a GPS receiver.
1. Press and hold the [H/L(NAV)] key, display the posi-
tion information on the LCD. If the GPS receiver is
not receiving a fix, the display will be as shown in the
illustration on the right.
NOTE: When Ch16 is selected only lat/lon will shown.
not receiving a fix, the display will be as shown in the
illustration on the right.
NOTE: When Ch16 is selected only lat/lon will shown.
2. To hide the position information, press and hold the
[H/L(NAV)] key again.
10.15 INTERCOM OPERATION
Connecting a CMP25 RAM+ or VH-310 handset to the GX3000S allows inter-
com communications. Refer to section “13.2 INTERCOM OPERATION” for
CMP25 RAM+ Microphone or section “14.2 INTERCOM OPERATION” for VH-
310 Handset.
com communications. Refer to section “13.2 INTERCOM OPERATION” for
CMP25 RAM+ Microphone or section “14.2 INTERCOM OPERATION” for VH-
310 Handset.
DISTRESS
PUL L OP EN
SCAN
DW
NAV
WX
CALL
SET
MEM
IC
U.
I.C
MENU
16
9
MATRIX
RAM
1
RAM 1
RAM 2
DISTRESS
PUL L OP EN
SCAN
DW
NAV
WX
CALL
SET
MEM
IC
U.
I.C
MENU
16
9
MATRIX
RAM
2
RAM 1
RAM 2
DISTRESS
PUL L OPEN
SCAN
DW
NAV
WX
CALL
SET
MEM
IC
U.
I.C
MENU
16
9
RAM 1 RAM 2
RAM 1
RAM 2
DISTRESS
PUL L OPEN
SCAN
DW
NAV
WX
CALL
SET
MEM
IC
U.
I.C
MEN U
16
9
ALL
RAM 1
RAM 2
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.