Yaesu Musen Co. Ltd. 30143X3D User Manual
Page 33
GX3000S
(Second Station Mic’s PTT switch is pressed)
(GX3000S’s PTT switch is pressed)
10.15.1 Communication
1. Press and hold the [DW(IC)] key, the mode is changed to “INTERCOM”
mode.
2. If your GX3000S is equipped two CMP25 RAM+ Mic’s
(or VH-310 Handset), select the companion you wish
to communicate (
to communicate (
Ram1
,
Ram2
, or
ALL
) with the
CHANNEL selector knob, then press the [ENT] key.
3. When the “INTERCOM” is activated, “
Intercom
” is displayed on the
GX3000S, and “IC” is displayed on the
CMP25 RAM+ Mic or VH-310 Hand-
set.
CMP25 RAM+ Mic or VH-310 Hand-
set.
4. Press the PTT switch. “
Talk
” will be
shown on the display.
NOTE: A warning beep will be emitted
when the GX3000S microphone’s PTT
switch is pressed while the RAM+ Mic’s
or VH-310 Handset’s PTT switch is
pressed.
NOTE: A warning beep will be emitted
when the GX3000S microphone’s PTT
switch is pressed while the RAM+ Mic’s
or VH-310 Handset’s PTT switch is
pressed.
5. Speak slowly and clearly into the microphone, hold the microphone about
1/2 inch away from your mouth.
6. When finished, release the PTT switch.
7. To exit the “INTERCOM” mode and return to radio operation mode, press
7. To exit the “INTERCOM” mode and return to radio operation mode, press
the [16/9] or [CLR] key.
10.15.2 Calling
While in INTERCOM mode, pressing and holding the [DW(IC)] key on the
GX3000S, CMP25, or VH-310 will produce a calling beep at the other station.
GX3000S, CMP25, or VH-310 will produce a calling beep at the other station.
NOTE
When both CMP25 RAM+ microphones (or VH-310 Handset) are inter-
com mode, the GX3000S will be temporarily disabled until the RAM+(s)
exit the RAM+ to RAM+ intercom mode.
com mode, the GX3000S will be temporarily disabled until the RAM+(s)
exit the RAM+ to RAM+ intercom mode.
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.