Yaesu Musen Co. Ltd. 30143X3D User Manual
GX3000S
Page 56
11.8.2 Transmitting a DSC Position Send Call
Pre-Programmable Calling
1. Press the [CALL(MENU)] key. The “
1. Press the [CALL(MENU)] key. The “
DSC Operation
”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “
POS
Send
.”
3. Press the [ENT] key to select the Individual directory.
4. Turn the CHANNEL selector knob to select a name
4. Turn the CHANNEL selector knob to select a name
in the directory, then press the [ENT] key.
5. Press the [ENT] key to send your position to the se-
lected vessel.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the [CALL(MENU)] key. The “
DSC Operation
”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “
POS
Send
.”
3. Press [ENT] key to show the Position Send directory.
This directory uses the INDIVIDUAL Directory infor-
mation.
mation.
4. Turn the CHANNEL selector knob to select “
Manual
,”
then press the [ENT] key.
5. Enter the MMSI number (nine digits) which you want
to contact, then press the [ENT] key.
6. Press the [ENT] key to send your position to the se-
lected vessel.
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.