Yaesu Musen Co. Ltd. 30143X3D User Manual
Page 71
GX3000S
13.2 INTERCOM OPERATION
13.2.1 Communication
1. Press and hold the [DW] key while in the “RADIO” mode, the mode is
changed to “INTERCOM” mode. When the “INTERCOM”
operation is activated, “IC” is displayed on the RAM+ Mic
(and VH-310 Handset) and “INTERCOM” is displayed on
the GX3000S.
operation is activated, “IC” is displayed on the RAM+ Mic
(and VH-310 Handset) and “INTERCOM” is displayed on
the GX3000S.
2. Press the PTT switch, “TALK” is displayed.
NOTE: A warning beep is emitted when
the RAM+ Mic PTT switch is pressed
while the transceiver microphone’s PTT
switch is pressed.
the RAM+ Mic PTT switch is pressed
while the transceiver microphone’s PTT
switch is pressed.
3. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
1/2 inch away from your mouth.
4. When finished, release the PTT switch.
5. Press the [DW] key momentarily the
5. Press the [DW] key momentarily the
mode will revert to “RADIO” mode.
13.2.2 Calling
Hold down the [DW] key for 1 second or more, when the “INTERCOM” opera-
tion is activated. A calling beep is emitted twice from the transceiver speaker.
tion is activated. A calling beep is emitted twice from the transceiver speaker.
(RAM+ Mic’s PTT switch is pressed)
(GX1500S’s PTT switch is pressed)
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.