Yaesu Musen Co. Ltd. 30143X3D User Manual
GX3000S
Page 72
13.3 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “11
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for
details). The
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP MODE” for
details). The
LAMP
,
CONTRAST
, and
KEY BEEP
menu item accessed from the
RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “
1. Press and hold down the [CALL/SET] key until “
RADIO SETUP
” menu ap-
pears.
2. Press the [
]/[] key to select “
RADIO SETUP
” or “
DSC SETUP
” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work on
by pressing the [
]/[] key.
4. Press the [CALL/SET] key.
5. Press the [
5. Press the [
]/[] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [
]/[] key to select “
EXIT
,” then press the [CALL/SET] key to
return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu
NOTE
When setup menu is selected, the GX3000S will be temporarily disabled
until the RAM+ mic, exits from the setup mode.
until the RAM+ mic, exits from the setup mode.
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.