Yaesu Musen Co. Ltd. 30393X20 User Manual

Page 10

Channel 13 is used at docks, bridges and for maneuvering in port. Messages 

on this channel must concern navigation only, such as meeting and passing 

in restricted waters. In emergencies and when approaching blind river bends, 
High power is allowed. Pressing the 

 key will change the power output 

from Low Power (1 Watt) to High (5 Watts). When you change from this chan-

nel then return to it, low power will be automatically selected.

When channel 67 is used for navigational bridge-to-bridge traffic between 

ships, High power may be used temporarily (in the USA band) by pressing the 

 key. When release the 

PTT switch, the transceiver will revert to low pow-

er.

Refer to the VHF MARINE CHANNEL CHART (page 32) for instructions on 

use of simplex and duplex channels.

All channels are factory-programmed in accordance with FCC, Industry 

Canada, and International regulations. The mode of operation cannot be 

altered from simplex to duplex or vice-versa. Simplex (ship to ship) or du-

plex (marine operator) mode is automatically activated, depending on the 

channel and whether the USA, Canadian or International operating band 

is selected.

Application for FCC/IC 

FCC ID: K6630393X20 

IC: 511B-30393X20