Yaesu Musen Co. Ltd. 30393X20 User Manual

Page 12

Before following the instructions below, insure the battery pack is in place 

and firmly connected. Care must be taken if the radio was dropped and a 

close inspection may be needed to insure the radio case and gaskets are 

in adequate condition.

The design of the 

HX380 allows water to enter between the radio and the bat-

tery pack, however waterproof performance is not compromised.
After using the 

HX380 in salt water environment is recommended to clean the 

radio with fresh water by rinsing the battery and radio (separately) under a 

sink facet or by dunking in a fresh water. After washing,use a soft cloth to thor-

oughly dry all parts of the radio and battery.
This will keep the radio parts and the battery clean and in top operating condi-

tion.



 To install the Belt Clip: align the 

Belt Clip to the groove of the Bat-

tery pack, then press the Belt Clip 

downward until it locks in place 

with a “Click.”



 To remove the Belt Clip: press the 

Belt Clip Tab away from the bat-

tery pack to unlock the Belt Clip, 

then slide the Belt Clip upward to 

remove it.





Application for FCC/IC 

FCC ID: K6630393X20 

IC: 511B-30393X20