Digital Security Controls Ltd. 01NB5132 User Manual

6

5. Record your programming choices in the worksheets in the back of the

manual.

6. To exit press [#].

Reporting by the system of openings/closings by individual wireless keys and
command output [✱][7] activation by wireless key buttons may be supported on
certain control panels. To do this, the system will reserve access codes 17 – 32
for wireless keys 01-16 respectively. You must program one access code for
each wireless key (using [✱][5] access code programming) for this feature to
work correctly.

NOTE: Program these access codes on the system after you have connected
the PC5132  to the Keybus (see section 2.4).

Refer to your system Installation Manual for information on access code
programming.

NOTE: The Identified Wireless Key Closing option is only available with the PC501X,
PC1555, PC580 v2.0 and higher by turning section [015] option 4 off.

To enable the reporting of openings and closings

 by identified wireless keys:

• Make sure the control panel is v2.0 or higher
• Program a valid access code for each key
• Program a closing and opening reporting code for each key’s access code
• Turn off the 

option in section [015] option [4] of the control

panel programming

To ensure that an 

unidentified wireless key cannot disarm the system, turn off

section [017], option [1] (in the control panel programming). This option is
available in control panels with software version 2.1 or higher.

NOTE: The Identified Wireless Key Command Output Activation feature is only
available with the PC501X,  PC1555 and PC580 v2.0 and higher.

To enable command output activation by wireless keys, ensure that:
• The control panel is v2.0 or higher
• Program a valid access code for each key
• Enable the PGM output attribute 

 for each PGM

output programmed as [✱][7][1-4] in sections [141] to [154].

Now that you have enrolled all the wireless devices, you will need to program
the system to work properly with the devices. See section 4 for more information.