Digital Security Controls Ltd. 01NB9010 User Manual
S e c t i o n 2. 2: C h an g i n g H o w t h e N T 90 1 0 W o r k s F o r U s e r s
3 5
Number of Invalid Codes Before Lockout . . . . . . . . . . . . . . . . . . . . . . Section [012]
Lockout Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Keypad Blanking Option . . . . . . . . . . . . . . . . . . . . . . . . . Section [016], Option [3]
Code Required to Restore Blanking . . . . . . . . . . . . . . . . . Section [016], Option [4]
Keypad Backlighting Option. . . . . . . . . . . . . . . . . . . . . . . Section [016], Option [5]
Bypass Displayed While Armed . . . . . . . . . . . . . . . . . . . . Section [016], Option [7]
Keypad Lockout Reporting Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [338]
Lockout Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Keypad Blanking Option . . . . . . . . . . . . . . . . . . . . . . . . . Section [016], Option [3]
Code Required to Restore Blanking . . . . . . . . . . . . . . . . . Section [016], Option [4]
Keypad Backlighting Option. . . . . . . . . . . . . . . . . . . . . . . Section [016], Option [5]
Bypass Displayed While Armed . . . . . . . . . . . . . . . . . . . . Section [016], Option [7]
Keypad Lockout Reporting Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [338]
2.2.14 Sleep Mode
To conserve the backup battery during the loss of AC power, the NT9010 control
unit will enter “sleep mode” after AC power is missing for 30 seconds. When the
NT9010 is in sleep mode, all the lights on the unit will turn off, except for the Sys-
tem light, which will flash regardless of Keypad Blanking options.
unit will enter “sleep mode” after AC power is missing for 30 seconds. When the
NT9010 is in sleep mode, all the lights on the unit will turn off, except for the Sys-
tem light, which will flash regardless of Keypad Blanking options.
NOTE:
The system will not enter “sleep mode” during some trouble con-
ditions.
NOTE:
There will be no remote sounder supervision when the system is in
“sleep mode”.
The system will “wake up” and run on the backup battery when any system event
occurs, or when a user presses a button on the unit. The key used to “wake up”
the system will be ignored.
occurs, or when a user presses a button on the unit. The key used to “wake up”
the system will be ignored.
NOTE:
Double calls for remote access should be done between 10 and 30
seconds from the first call. The first call may only wake up the system; an
additional call may then be required if the NT9010 does not pick up on the
second call.
additional call may then be required if the NT9010 does not pick up on the
second call.