Digital Security Controls Ltd. 01NB9010 User Manual
S ec ti o n 2 . 3 : C h a n g i n g O t h e r N T 9 0 10 F u n c t i o n s
4 3
Communicator Enabled/Disabled . . . . . . . . . . . . . . . . . . . Section [380], Option [1]
Pulse Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [380], Option [3]
Switch to Pulse Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [380], Option [4]
Post Dial Wait for Handshake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [161]
Maximum Dialing Attempts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [160]
Communicator Call Direction Options . . . . . . . . . . . . . . . . . Sections [361] to [368]
Busy Tone Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [701], Option [6]
Standard/UL Communications Priority . . . . . . . . . . . . . . . Section [701], Option [8]
Pulse Dialing Make/Break Ratio . . . . . . . . . . . . . . . . . . . . Section [702], Option [1]
Force Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [2]
ID Tone Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [5]
2100Hz/1300Hz ID Tone . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [6]
Bell on FTC/Trouble Only . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [8]
Delay Between Dialing Attempts . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [703]
Pulse Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [380], Option [3]
Switch to Pulse Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [380], Option [4]
Post Dial Wait for Handshake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [161]
Maximum Dialing Attempts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [160]
Communicator Call Direction Options . . . . . . . . . . . . . . . . . Sections [361] to [368]
Busy Tone Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [701], Option [6]
Standard/UL Communications Priority . . . . . . . . . . . . . . . Section [701], Option [8]
Pulse Dialing Make/Break Ratio . . . . . . . . . . . . . . . . . . . . Section [702], Option [1]
Force Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [2]
ID Tone Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [5]
2100Hz/1300Hz ID Tone . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [6]
Bell on FTC/Trouble Only . . . . . . . . . . . . . . . . . . . . . . . . . Section [702], Option [8]
Delay Between Dialing Attempts . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [703]
2.3.9
Communicator
Telephone
Numbers
Telephone
Numbers
The system can call 3 different telephone numbers for communication to central
station. The 1st Telephone Number is the primary number, the 2nd Telephone
Number is the secondary number and the 3rd Telephone Number will back up
the 1st telephone number if enabled.
station. The 1st Telephone Number is the primary number, the 2nd Telephone
Number is the secondary number and the 3rd Telephone Number will back up
the 1st telephone number if enabled.
You can program the 1st Telephone Number using Flash Programming, or in the
Advanced Programming (section [301]). The 2nd and 3rd Telephone Numbers must
be programmed in the Advanced Programming sections.
Advanced Programming (section [301]). The 2nd and 3rd Telephone Numbers must
be programmed in the Advanced Programming sections.
NOTE:
The 3rd telephone Number will NOT back up the 2nd telephone
Number.
If Alternate Dial is enabled the system will alternate between the 1st and 3rd tele-
phone numbers when attempting to call the central station. If disabled the system
will only attempt to call the 3rd telephone number after failing to communicate on
the 1st telephone number.
phone numbers when attempting to call the central station. If disabled the system
will only attempt to call the 3rd telephone number after failing to communicate on
the 1st telephone number.
NOTE:
For Alternate Dial to work properly the 3rd telephone Number
must be both enabled and programmed.
Telephone numbers can be up to 32 digits which will allow you to add special digits
if required. To program the telephone number enter numbers 0 through 9 as
required. The following is a list of HEX digits which can also be programmed and
the function they perform:
if required. To program the telephone number enter numbers 0 through 9 as
required. The following is a list of HEX digits which can also be programmed and
the function they perform:
HEX (B) - simulates the [✱] key on a Touch-Tone telephone
HEX (C) - simulates the [#] key on a Touch-Tone telephone,
or end of telephone number marker
HEX (D) - forces the system to search for dial tone
HEX (E)
- forces the system to pause for 2 seconds
HEX (F)
- end of telephone number marker
1st telephone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [301]
2nd telephone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [302]
2nd telephone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [302]