Digital Security Controls Ltd. 13HS2KWFPV9 User Manual

The HS2LCDWF wireless keypad is compatible

with the HS2016/32/64 and HS2128 PowerSeries

Neo wireless panels.

The HS2LCDWF keypad package is available in

five distinct configurations, described below

.

Proximity (Prox) Tag.

Mount the keypad where it is accessible from desig-

nated points of entry and exit. Once a dry and secure

location has been selected, perform the following

steps to mount the keypad.

1. Locate the screw holes (4) at each corner of the

mounting plate.

2. Use the four screws provided to affix the mount-

ing plate to the wall; ensure the mounting tabs

are facing you (see diagram below). If the keypad

is to be mounted on drywall, use plastic anchors

(not supplied). 

3.Align the four mounting slots in the HS2LCDWF

housing with the four mounting tabs protruding

from the mounting plate. 

4. Slide the keypad into place.

5. Firmly but carefully snap the keypad down onto

the mounting plate. 

1. Insert the four rub-

ber feet (found in

the hardware pack)

into the indentations

provided in the bot-

tom of the desk

stand.

2. Place the desk stand on a secure, uncluttered sur-

face.

3.Align the four mounting slots in the HS2LCDWF

housing with the four mounting tabs protruding

from the desk stand. 

4. Slide the keypad into place. Firmly but carefully

snap the keypad down onto the desk stand.

5. To fasten the keypad securely onto the desk

stand, locate the hole in the centre of the bottom

of the desk stand. Using the screws provided,

screw the keypad to the desk stand.

1. Slide the keypad up and out from the mounting

plate/desk stand (removing the screws first if

required). The bay for the four AA batteries is

open and visible at the back of the keypad.

2. Insert the batteries as directed on the back of the

keypad. Ensure the correct polarity is observed.

3. Replace the keypad on the mounting plate/desk

stand.

• Temperature range: -10°C to +55°C (14°F to 131°F)

UL/ULC: 0°C to +49°C (32°F to 120°F)

• Humidity (MAX): 93%R.H. non-condensing
• Plastic enclosure protection degree: IP30, IK04
• Power adaptor output voltage: 9.0V

DC

 @ 1.25A. Mod-

els - US/Latin America: 

xx

; Canada: 

xx;

 EU: 

xx

; UK: 

xx

; AUS./NZ: 

xx;

 China: xx limited power supply, 

acceptable to the authority having jurisdiction

• Battery: 4 AA, 1.5 V, Energizer alkaline consumer-

grade

• Low Battery Indication: 4.3 V
• HS2LCDWF current draw: 

50

mA 

• Wall-mount tamper
• 5 programmable function keys
• Ready (Green LED), Armed (Red LED), Trouble/RF 

Jam (Red/Yellow LED), AC (Green LED)

• Frequency: 433.92MHz (

xx only/xx only)

• Frequency: 868.35MHz (

xx only)

• Frequency: 915MHz 

(xx only)

• Up to 128 wireless zones

HS2LCDWF - wall mount HS2LCDWFP - prox tag
• 1 HS2LCDWF keypad • 1 HS2LCDWF keypad
• 1 HS2LCDWF wall 

bracket

• 1 HS2LCDWF wall 

bracket

• 1 Installation Manual

• 1 Installation Manual

• 1 inner door sticker

• 1 inner door sticker

• 4 AA batteries

• 4 AA batteries

• 1 hardware pack

• 1 hardware pack
• 1 prox tag

• 1 HS2LCDWFBRK wall 

bracket

• 1 HS2LCDWFBRK wall 

bracket

• 1 Installation Manual

• 1 Installation Manual

• 1 inner door sticker

• 1 inner door sticker

• 1 power adaptor

• 1 power adaptor

• 4 AA batteries

• 4 AA batteries

• 2 hardware packs

• 2 hardware packs

• 1 prox tag

• 1 prox tag
• 1 transformer

annunciation, transformer and deskstand
• 1 HS2LCDWFBRK wall 

bracket

• 1 transformer

• 1 Installation Manual

•1 HS2LCDWFDMK desk 

stand

• 1 inner door sticker
• 1 power adaptor
• 4 AA batteries
• 2 hardware packs
• 1 prox tag

Screw hole

Screw hole

Screw hole

Screw hole

Mounting tab

Mounting tab

Mounting tab

Mounting tab