Digital Security Controls Ltd. 13HS2KWFPV9 User Manual

1. Slide the keypad up and out from the mounting

plate / desk stand.

2. Locate the power adaptor jack at the back of the

keypad housing.

3. Place the adaptor plug in the housing indentation,

perpendicular to the keypad. Insert the adaptor

plug firmly into the jack.

4. Pivot the adaptor plug downwards so that it fits

flush with the housing. Guide the AC wire along

the channel provided in the keypad housing; the

wire will extend through the bottom of the hous-

ing.

5. Replace the keypad on the mounting plate/desk

stand (in the latter case, a further channel is pro-

vided in the bottom of the desk stand. Guide the

AC wire along this channel; the wire will extend

through an opening in the back of the stand).

6. Plug the adaptor into a wall outlet.

There are several programming options available for

the keypad (see below). Programming the keypad is

similar to programming the rest of the system. To

turn an option on/off, press the number correspond-

ing to the option on the number pad. The numbers of

the options that are currently turned on will be dis-

played along the top of the LCD. For information on

programming the rest of your security system, please

refer to your system’s Installation Manual. 

To enter language programming, enter programming sec-

tion [000] then subsection [000]. Then enter the two-digit 

number that corresponds to the language desired: 

The HSM2HOST wireless transceiver must be

enrolled onto the alarm panel before any wireless

devices can be enrolled.

When the alarm system is powered up for the first

time, the first keypad or the HSM2HOST (if using a

wireless keypad as the first keypad) can be enrolled.

To do this:

1. Once the HSM2HOST is wired to the alarm panel

and power has been applied, power up a wireless

keypad.

2. Press any button on the keypad to enroll it on the

HSM2HOST. The HSM2HOST is then automatically

enrolled on the alarm panel. 

1. Enter [

][8][Installer Code] and then section

[804] > 000.

2. When prompted, either activate the device to

enroll immediately or enter a device serial num-

ber. Do the latter to pre-enroll devices then enroll

them later at the customer site.

3. Use the scroll keys or type in the corresponding

number to select an option.

4.  Scroll through the available selections, key in a

number or enter text as appropriate.

5.  Press [*] to accept and move to the next option.

6. Once all options are configured, the system

prompts to enroll the next device.

7. Repeat the process described above until all wire-

less devices are enrolled.

1. Enter [

][8][Installer Code] and then section

[804] > 905.

2. Use the scroll keys to select the keypad or press

[#] to exit. 

3. Select [*] to delete. The screen will read “Keypad

deleted”. 

1. Insert the tip of a flat-head screwdriver into the

slot at the bottom left section of the keypad. 

2. Gently lower the handle of the screwdriver, open-

ing the left side of the unit’s faceplate. 

3. Repeat steps 1 and 2 using the slot at the bottom-

right section of the unit. This will remove the

unit’s faceplate and allow access for mounting. 

1. Slide the keypad up and out from the mounting

plate/desk stand (removing the screws first if

required). The bay for the four AA batteries is

open and visible at the back of the keypad.

2. Insert the batteries as directed on the back of the

keypad. Ensure the correct polarity is observed.

3. Replace the keypad on the mounting plate/desk

stand.

1. Slide the keypad up and out from the mounting

plate/desk stand.

2. Locate the power adaptor jack at the back of the

keypad housing.

Plug

Mounting

Holes

Mounting

Holes

Wire

 channel

01 = English (default)

02 = Spanish

03 = Portuguese

04 = French

05 = Italian

06 = Dutch

07 = Polish

08 = Czech

09 = Finnish

10 = German

11 = Swedish

12 = Norwegian

13 = Danish

14 = Hebrew

15 = Greek

16 = Turkish

17 = FFU

18 = Croatian

19 = Hungarian

20 = Romanian

21 = Russian

22 = Bulgarian

23 = Latvian

24 = Lithuanian

25 = Ukrainian

26 = Slovakian

27 = Serbian

28 = Estonian

29 = Slovenian