Digital Security Controls Ltd. 13WTK5504P User Manual

At the selected Auto-Arm time, the keypad buzzers will sound for a programmed amount of time (pro-

grammable by the installer only) to warn that an auto-arm is in progress. The bell can also be pro-

grammed to squawk once every 10 seconds during this warning period. When the warning period is 

complete, the system will arm with no exit delay and in the Away Mode.

Auto-Arming can be cancelled or postponed by entering a valid access code only during the pro-

grammed warning period. Auto-Arming will be attempted at the same time the next day. When the 

Auto-Arming process is cancelled or postponed, the Auto-arm Cancellation Reporting Code will be 

transmitted (if programmed).
If arming is inhibited by one of the following, the Auto-Arm Cancellation transmission will be commu-

nicated:
• AC / DC Inhibit Arm
• Latching System Tampers
• Zone Expander Supervisory Fault

When this button is pressed and the auto-arm feature is currently disabled, “Auto-Arm Enabled” is dis-

played on the button and acknowledgment beeps sound. If the button is pressed and the late-to-close 

feature is enabled, “Auto-Arm Disabled” is displayed on the keypad and error tone sounds.
Notes: This feature is partitionable, and therefore this feature will only be enabled on Partition 1 of a 

PowerSeries panel. If this is attempted on an SCW or Alexor, the feature does not exist, and should 

return with “Function Not Available” and sound an error tone.

More > User Options [Master Code] > User Functions > Enable DLS
From time to time, your installer may need to send information to or retrieve information from your 

security system. Your installer will do this by having a computer call your system over the telephone 

line.If enabled, the installer will be able to access Installer Programming via remote (DLS). In case of 

DLS access this provides a window where rings will be detected by the panel. When enabled, the key-

pad sounds acknowledgment beeps. 

You may need to prepare your system to receive this ‘downloading’ call. To do this press Enable DLS.
This allows downloading for a limited period of time. During this time, the system will answer incom-

ing downloading calls. The DLS window will remain open for 6 hrs, during which time the installer will 

be able to enter DLS an unlimited number of times. After the 6-hr window has expired, Installer’s Pro-

gramming will be unavailable again until the window is re-opened. 
For more information on this feature, please ask your installer.

If enabled by the installer, the panel will make 1 attempt to call the downloading computer. The down-

loading computer must be waiting for the panel to call before downloading can be performed. If enabled 

on the panel, the keypad sounds acknowledgment beeps; if disabled, the keypad sounds an error tone 

and displays “Function not available”.

When a trouble condition is detected, the Trouble ( ) indicator will turn on, and the keypad will sound 

double beeps every 10 seconds. Press anywhere on the keypad to silence the beeps. Press ( ) to view 
the trouble condition, and press the specific option for further information. 

 

Service Required 

(Press for more 

details)

• Panel low battery
• Bell circuit trouble
• General system trouble
• General system tamper
• Module supervision 
• Rf Jam condition detected 
• PC5204 low battery
• PC5204 AC failure

Call for service

AC Trouble

If the building and/or neighborhood has lost 

electrical power, the system will continue to 

operate on battery for several hours.

Call for service