Digital Security Controls Ltd. 163G4005 User Manual
14
Universal Cellular Communicator
Connection example
!
Incorrect connections may result in FTC fault or improper operation. Inspect wiring and ensure connections are
correct before applying power. DO NOT route any wiring over circuit boards; maintain at least 1” (24.5 mm) separa-
tion. A minimum 1/4” (6.4 mm) separation must be maintained at all points between Power Limited wiring and all other
Not-Power Limited wiring.
correct before applying power. DO NOT route any wiring over circuit boards; maintain at least 1” (24.5 mm) separa-
tion. A minimum 1/4” (6.4 mm) separation must be maintained at all points between Power Limited wiring and all other
Not-Power Limited wiring.
Figure 4 – Typical wiring diagram: A) 4005 Series; B) disconnect telephone line prior servicing; C) example of T1 connection as
an open-collector output; D) 10.7 to 27.6 V
_
power supply; E) T1, T2, T3, T4, T5 and T6 terminals may be pro-
grammed as open-collector outputs or inputs lines; F) alarm control panel; G) telephone line connection (PSTN);
H) ground connection, this connection is necessary.
H) ground connection, this connection is necessary.