Digital Security Controls Ltd. 17LE4000 User Manual

Section 1: Introduction

The LE4000 is a cellular communicator that sends alarm system information to a Sur-Gard System I-IP, II, III, IV or 5 receiver

through an LTE or 3G wireless network. This cellular communicator can be used with UL/ULC Listed compatible control units, as

indicated in the manufacturer's installation instructions.

The performance of the LE4000 depends greatly on cellular network coverage. Therefore, it should not be mounted without first per-

forming placement tests to determine the best location for reception (minimum of one blue/green LED ON). Optional antenna kits –

LTE-8ANT (8ft/2.4m), LTE-15ANT (15ft/4.6m), LTE-25ANT (25ft/7.6m) and LTE-50ANT (50ft/15.2m) are available.

Note: The LE4000 is designed to work with the Contact ID communication format as described in the SIA DC-05 standard, as well

as the SIA communications format as described in the SIA DC-03 standard. Before completing the field installation of the alarm mon-

itoring system please ensure communication with the supervising central station is successful by sending several events and getting

confirmation that they have been received.

1.1 Features

Penta-Band

LTE; Dual-band UMTS Radio

Advanced

Carrier Selection

Cellular

Signal Indicator

LTE

/3G / Internet communication with Sur-Gard SG-System I-IP / II / III / IV / 5

Compatible

with 4-digit or 10-digit Contact ID communication format as described in SIA DC-05 Standard and the SIA DC-

standard for 300 baud. Example of suitable compatible alarm panels:

DSC

Models HS2128, HS2064, HS2032, HS2016, PC1864, PC1832, PC1616, PC4020.

Panel

Transmission Monitoring for up to four phone numbers

Simulates

landline

Switches

automatically to the LTE or 3G network in the event of landline trouble (e.g., line down)

DLS

support for status, firmware updates and remote debug enable

Remote

Firmware Upgrade

Remote

Diagnostics

Case

and Wall Tamper

Panel

Format Detection

Programmable

Input

Programmable

Output

1.2 Technical Specifications

The input voltage to the LE4000 can be drawn from the UL/ULC Listed control panel or provided by an external UL/ULC Listed

power supply (with battery back-up) rated for the application (external power-limited source).

Power Supply Rating

Input Voltage Class:

Class 2, power limited

Compatible External Power Adapters (2-prong):

DSC

ADP1310(W)-NAU (US) / ADP1310(W)-NA (Canada)

NOTE:

For UL/ULC listed installations, the input rating for the external power

adapter

is 120V

/60Hz/0.4A.

Input Voltage (Nominal):

13.8V

required

Input Current:

700mA

LE4000 Installation Manual