Digital Security Controls Ltd. 17LT9080 User Manual

7

Note: The header connectors are located on the bottom of the cellular module. The SIM card carrier is located 

on the top.

To mount the cellular module perform the following steps:

1. Insert the SIM card into the SIM card carrier.
2. Push the four nylon standoffs through the bottom of the cellular module. The longer snap lock

ends click through the top of the cellular module, see Figure 2.

3. Align the connectors on the cellular module with the matching connectors on the CSGM.

Note: The main connector is shrouded and only inserts correctly. Standoffs ensure the connectors on both

modules align correctly.

4. Press the cellular module onto the CSGM until the standoffs snap into place.
5. Verify that the two smaller connectors insert correctly, see Figure 3. If you insert the connectors

incorrectly, do the following:

•

Pinch the locking tops of the four adjacent standoffs to loosen the cellular module
from the CSGM.

•

Realign the cellular module and repeat steps 3 to 5.

6. Place the FCC label included in the cellular module kit on the box that you installed the CSGM

in. Ensure that it is visible when the doors of the FACU are closed.