Digital Security Controls Ltd. 17TL280LER User Manual
[214] Cellular Receiver 2 Port
Default (0BF5/3061)
This section defines the port of cellular receiver 2. Change the value of this port when the installation is loc-
ated behind a firewall and must be assigned a particular port number, as determined by the central sta-
tion system administrator. Valid range: 0000 - FFFF.
NOTE: Do not program cellular receiver 1 and cellula r receiver 2 to communicate to the same receiver.
Default (0BF5/3061)
This section defines the port of cellular receiver 2. Change the value of this port when the installation is loc-
ated behind a firewall and must be assigned a particular port number, as determined by the central sta-
tion system administrator. Valid range: 0000 - FFFF.
NOTE: Do not program cellular receiver 1 and cellula r receiver 2 to communicate to the same receiver.
[215] Cellular Receiver 2 APN
Default ( )
The APN determines the cellular network that the communicator will connect to. This information is avail-
able from the network carrier. Program this section with up to 32 ASCII characters.
NOTE: When a SIM card with a custom APN is used, the unit will not have access to the Internet. DLS
Default ( )
The APN determines the cellular network that the communicator will connect to. This information is avail-
able from the network carrier. Program this section with up to 32 ASCII characters.
NOTE: When a SIM card with a custom APN is used, the unit will not have access to the Internet. DLS
and remote flash can still be done if section [221] is programmed with a valid public APN.
[216] Cellular Receiver 2 Domain Name
Default ( )
Enter the cellular receiver 2 Domain Name with up to 32 ASCII characters.
Default ( )
Enter the cellular receiver 2 Domain Name with up to 32 ASCII characters.
Cellular Options
[221] Cellular Public Access Point Name
Default ( )
When the communicator is operating on a private APN, use this section to select a public APN for DLS
and remote firmware update. This information is available from the network carrier. The APN identifies
the public cellular network that the communicator will connect to.
Default ( )
When the communicator is operating on a private APN, use this section to select a public APN for DLS
and remote firmware update. This information is available from the network carrier. The APN identifies
the public cellular network that the communicator will connect to.
[222] Cellular Login User Name
Default ( )
Some network carriers require login credentials when connecting to an APN. Program the login user
name in this section. Enter the Cellular Login User Name with up to 32 ASCII characters.
Default ( )
Some network carriers require login credentials when connecting to an APN. Program the login user
name in this section. Enter the Cellular Login User Name with up to 32 ASCII characters.
[223] Cellular Login Password
Default ( )
Some network carriers require login credentials when connecting to an APN. Program the login Pass-
word in this Section. Enter the Cellular Login Password with up to 32 ASCII characters.
Default ( )
Some network carriers require login credentials when connecting to an APN. Program the login Pass-
word in this Section. Enter the Cellular Login Password with up to 32 ASCII characters.
[224] Cellular Test Transmission Time of Day
Default (9999)
Enter a 4 digit value using the 24-hour clock format (HHMM) to set the test transmission time of day. Valid
range: 00-23 for the hours (HH) and 00-59 for the minutes (MM).
NOTE: To disable the test transmission time of day enter 9999 or FFFF in this section.
The internal date and time will be automatically programmed by the primary receiver only.
Default (9999)
Enter a 4 digit value using the 24-hour clock format (HHMM) to set the test transmission time of day. Valid
range: 00-23 for the hours (HH) and 00-59 for the minutes (MM).
NOTE: To disable the test transmission time of day enter 9999 or FFFF in this section.
The internal date and time will be automatically programmed by the primary receiver only.
[225] Cellular Test Transmission Cycle
Default (000000)
This value represents the interval in between test transmissions in minutes. Valid range: 000000 -
999999 minutes. Once the unit has sent the initial periodic test transmission, all future test transmissions
will be offset by the programmed number of minutes. See sections [026] - [029].
Default (000000)
This value represents the interval in between test transmissions in minutes. Valid range: 000000 -
999999 minutes. Once the unit has sent the initial periodic test transmission, all future test transmissions
will be offset by the programmed number of minutes. See sections [026] - [029].
Table 12: Cellular Test Transmission Interval
Test Transmission Inter-
val
Daily
Weekly
Monthly
Programmed Minutes
001440
010080
043200
NOTE: Minimum value is 000005 minutes. Programming an interval that is less than 5 minutes will dis-
able test transmission.
[226] Network Trouble Delay
Default (0F)
This option is used to program the delay, in minutes, for reporting a cellular trouble delay. Valid entries
are 00 - FF. (e.g., for a 10 minute cellular trouble delay enter: 0A). When this section is programmed as
00, Cellular, Ethernet and Supervision troubles are not communicated.
Default (0F)
This option is used to program the delay, in minutes, for reporting a cellular trouble delay. Valid entries
are 00 - FF. (e.g., for a 10 minute cellular trouble delay enter: 0A). When this section is programmed as
00, Cellular, Ethernet and Supervision troubles are not communicated.
[227] Voice Call Timeout
Default (00) Valid entries are 00 - FF.
Default (00) Valid entries are 00 - FF.
28