Digital Security Controls Ltd. 17WS9TCHW User Manual

Introduction

Refer to the iotega Reference Manual for information regarding the limitations of product use and function and manufacturer's
liability. Use these instructions with the iotega Reference Manual. The WS9TCHW touchscreen is compatible and intended for use
with the iotega Wireless Security System.

Mounting the hardware

Step 1

Step 2

Step 3

Step 4

Install the wire through the wall for

mounting.

Attach the mounting plate to the wall with the

mounting hardware. If mounting on drywall, mark

the four installation points, remove the mounting

plate, and install the drywall inserts.

Connect the USB cable.

Insert the left side of the touch-

screen into the mounting bracket at

a slight angle.

Step 5

Step 6

Step 7

Push the right side of the touch-

screen into the mounting bracket.

Remove the breakable tab and place the flush

wire wall mount through the channel.

To remove the touchscreen insert a flat

head screwdriver into one of the rear

slots at a downward angle and push up

to release the touchscreen.

Enrolling the touchscreen

Step 1

Step 2

Step 3

Step 4

Power up the touchscreen.

During power up the following events
occur:

The touchscreen keypad
flashes.

The Power and Link Speed
LEDs illuminate.

The Link Activity LED
flashes.

The Remote Connection LED
stays on when ready.

If it is not enrolled, the serial number and enroll

button appears.

On the Install App go to Enroll devices.

Enter the touchscreen serial number

and tap Enroll.

WS9TCHW Ver 1.0 Touchscreen Installation