Digital Security Controls Ltd. 18LE2077 User Manual
24
C
OMMUNICATIONS
R
EPORTING
C
ODES
[023] Panel Absent Trouble
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur when communications
with the panel have been lost for more than 60 seconds.
[024] Panel Absent Trouble Restore
[024] Panel Absent Trouble Restore
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur when communications
with the control panel have resumed.
[025] Radio Activation Restore
[025] Radio Activation Restore
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur after any successful Con-
nect24 programming session.
nect24 programming session.
S
YSTEM
T
EST
O
PTIONS
[026 - 029]
Test Transmissions to Primary Receiver, with Backup to Secondary Receiver:
Set Ethernet Section [026] to (FF); [027] to (00). Set Cellular Section [028] to (FF); [029] to
(00).
• If the test transmission fails to the primary receiver it will backup to the secondary receiver.
• If the test transmission fails to the secondary receiver an FTC trouble will be generated.
Test Transmission Unique to Primary and Secondary Receivers:
Set Ethernet Section [026] to (FF); [027] to (FF). Set Cellular Section [028] to (FF); [029] to
(FF).
• The module will send periodic test transmissions to each receiver independently, with no
Set Ethernet Section [026] to (FF); [027] to (00). Set Cellular Section [028] to (FF); [029] to
(00).
• If the test transmission fails to the primary receiver it will backup to the secondary receiver.
• If the test transmission fails to the secondary receiver an FTC trouble will be generated.
Test Transmission Unique to Primary and Secondary Receivers:
Set Ethernet Section [026] to (FF); [027] to (FF). Set Cellular Section [028] to (FF); [029] to
(FF).
• The module will send periodic test transmissions to each receiver independently, with no
backups.
• If the test transmission fails to any of the programmed receivers, an FTC trouble will be
generated.
Alternate Test Transmission:
Alternate Test Transmission can be enabled or disabled in Section [005] Toggle Option [7].
[026] Ethernet 1 Transmission
Alternate Test Transmission can be enabled or disabled in Section [005] Toggle Option [7].
[026] Ethernet 1 Transmission
Default (FF)
Program 00 to disable this event transmission or FF to enable. See System Test Options (above)
for details on settings.
Table 10: Communications Reporting Codes
Event
SIA
Identifier
SIA
Reporting
Code
CID
Qualifier
CID
Event
Code
CID
Reporting
Code
CID
User/
Zone
[023] Panel Absent Trouble
ET
001
1
3
55
001
[024] Panel Absent Trouble
Restore
ER
001
3
3
55
001
[025] Radio Activation
Restore
RS
001
3
5
52
001
[026] Ethernet 1 Test Trans-
mission
RP
001
1
6
A3
951
[027] Ethernet 2 Test Trans-
mission
RP
002
1
6
A3
952
[028] Cellular 1 Test Trans-
mission
RP
003
1
6
A3
955
[029] Cellular 2 Test Trans-
mission
RP
004
1
6
A3
956
[030] FTC Restore
YK
001
3
3
54
001