Manualsbrain.com
  1. Manuals
  2. Brands
  3. Digital Security Controls Ltd.
  4. 18LE2077
  5. User Manual

Digital Security Controls Ltd. 18LE2077 User Manual

Download
Page of 51
26
[036] Panel Firmware Update Successful
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event will occur when the 
panel firmware is updated successfully.
[037] Panel Firmware Update Fail
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event will occur when the 
panel firmware updated has failed.
Table 12:  Firmware Upgrade Reporting Codes
E
THERNET
 R
ECEIVER
 1 O
PTIONS
[101] Ethernet Receiver 1 Account Code
Default (0000000000)
The account code is used by the central station to distinguish between transmitters. This
account code is used when transmitting heartbeat signals to the central station receiver.
Signals received from the Panel will use the control panel account number. Valid range:
0000000001-FFFFFFFFFE. Programming all 0 or all F will cause a Module Configuration
Trouble.
NOTE: If Ethernet Receiver 1 and Cellular Receiver 1 are programmed as the same receiver (IP
and port number are identical), Ethernet Receiver 1 account code will be used.
[102] Ethernet Receiver 1 DNIS
Default (000000)
The Dialed Number Information Service (DNIS) is used in addition to the Account Code to
identify the Communicator module at the central station. Valid range: 000000 - 099999.
Value is entered as a leading 0 followed by the 5 digit DNIS. Format is Binary Coded Decimal
(BCD).
NOTE: Each Ethernet/Cellular receiver must be programmed with a unique DNIS.
[103] Ethernet Receiver 1 Address
Default (127.000.000.001)
The default address enables the Communicator to operate in Unattended Mode.
Unattended Mode is used when a receiver is not available and the unit is required to perform
DLS sessions. Typically used where the customer programs the control panel daily due to
access control and still wants to receive alarms without buying extra hardware (receiver) or
software.
Event
SIA 
Identifier
SIA 
Reporting 
Code
Contact ID
Qualifier
Contact ID
Event 
Code
Contact ID
Reporting 
Code
Contact 
ID
User/
Zone
[033]Comm. FW 
Update Begin
LB
00
1
9
03
002
[034]Comm. FW 
Update Successful
LS
00
3
9
03
002
[035]Panel FW 
Update Begin
LB
00
1
9
03
003
[036]Panel FW 
Update Successful
LS
00
3
9
03
003
[037]Panel FW 
Update Fail
LU
00
1
9
04
003