Digital Security Controls Ltd. 18LE2077 User Manual

[628] System Disarmed Not Ready

Default (Disarmed Not Ready);

This label will be included in the response to a status request command if a partition is disarmed
and is not ready to arm.

[629] System is in Alarm

Default (is in Alarm);

This label will be included in the response to a status request command if a partition is in alarm.

[630] Trouble Label

Default (Service is Required);

This label will be included in the response to the Alarm Memory command if there are no
alarms in memory.

[631] No Alarms in Memory

Default (No Alarm Memory);

This label will be included in the response to an Alarm Memory Request if there are no alarms
on the system.

[634] Error Code

Default (Error Code);

When an SMS initiated function fails, the module will send an error code to the telephone num-
ber that was source of the
SMS request. Message format is: [Account Label] [Date and Time] [Error Code] [Error Type].
Fields are “space” delimited.

ECEIVER

IAGNOSTIC

ESTING

[901] Diagnostic Test Transmission
[1]Ethernet 1 (OFF).
[2] Ethernet 2 (OFF).
[3] Cellular 1 (OFF).
[4] Cellular 2 (OFF).
[5],[6],[7],[8] Reserved(OFF).
This Section may be used by the installer to force the Communicator to send an immediate test

transmission to specific receivers, to verify that the communications paths are available.

Diagnostic Test Transmission failure will indicate as FTC trouble (Yellow LED = 9 flashes). If an

FTC error occurs when testing all receivers, select only one receiver and repeat test to isolate

the receiver that is not communicating.

Table 15: Error Code Format

Class

Definition

Error

Definition

DLS

Bad SMS format

Session failed due to local network issues

Unable to connect to remote server

Bad DLS access code

DLS lockout active

TFTP

Bad SMS format

Session failed due to local network issues

Unable to connect to remote server

File not found on TFTP server

Update was unsuccessful

Update was successful