Digital Security Controls Ltd. 18LE2077 User Manual

Page of 51
7
CAUTION :
• Do not stay close to the equipment during device operation and to do not touch any exposed
wires and other conductive surfaces,
• Recycle the battery according to the local rules and regulations.
NOTE: Prior to installation of the LE2077 or TL2553G Communicator, confirm with your local 
carrier that the HSPA/3G network is available and active in the area where the Communicator 
will be installed, and that the location provides a radio signal strength that is adequate for 
uninterrupted service.
F
EATURES
• 128-bit Advanced Encryption Standard (AES) encryption via HSPA/3G and Ethernet/
Internet.
• Activating, initializing and remote programming through C24 Communications.
• Back up or primary HSPA/3G/2G alarm communication. 
• Does not require an external HSPA/3G/2G antenna.
• Ethernet LAN/WAN 10/100 BaseT (TL2553G only).
• Full event reporting to central station.
• Fully redundant Ethernet/Internet and HSPA/3G/2G Dual-path Alarm Communication
(TL2553G only).
• Individual Ethernet and/or HSPA/3G periodic test transmission.
• 2-way audio (listen-in feature) provided over Cellular.
• Integrated call routing.
• Remote Firmware upgrade capability of the Communicator and Panel Firmware via Ethernet
and/or HSPA/3G radio.
• Dual-Band Operation: 850 MHz, and 1900 MHz. (North America only)
• CID  and SIA format reporting.
• Subscriber Identity Module (SIM) card included with Communicator. (North America only)
• Supervision heartbeats via HSPA/3G/2G and/or Ethernet/Internet.
UL/ULC I
NSTALLATION
 R
EQUIREMENTS
• For ULC Residential fire and burglary applications the LE2077/TL2553G can be used as
primary communication channel via either Cellular or Ethernet (as applicable) or as a back-up
in conjunction with the Digital Alarm Communicator Transmitter (DACT). Test transmission
every 24hours shall be enabled on each channel.
• For UL Residential fire and burglary applications the LE2077/TL2553G can be used as
primary communication channel via either Cellular or Ethernet (as applicable), or as a back-
up in conjunction with the DACT. (30 day test transmission is required on each channel). 
C
OMMUNICATOR
 F
REQUENCY
 B
ANDS
 
FOR
 N
ORTH
 A
MERICA
Table 1:  2G Frequency Bands
Transmit Direction
Cellular 850 North America
PCS 1900 North America
Transmit Frequency
824 MHz to 849 MHz
1850 MHz to 1910 MHz
Receive Frequency
869 MHz to 894 MHz
1930 MHz to 1990 MHz
Table 2: 3G Frequency Bands
Transmit Direction
UMTS 850 North America, 
International
UMTS 1900 North America
Transmit Frequency
824 MHz to 849 MHz
1850 MHz to 1910 MHz
Receive Frequency
869 MHz to 894 MHz
1930 MHz to 1990 MHz