ADC Telecommunications Inc. PRSM070A User Manual

Page of 138
SNMP Interface
Page 300
FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc
ADCP-77-073
  • Issue 2 • 11/2009
fwuRmtSERFRIHWRev
Remote SeRF Inventory - 
Hardware Version of the 
Remote system
DisplayString
GET
fwuRmtSERFRISerialNumber
Remote SeRF Inventory-Serial 
Number
DisplayString
GET
fwuRmtSERFRIADCPartNumber
Remote SeRF Inventory-ADC 
Part Number
DisplayString
GET
fwuRmtSERFOptSFPNumber
A unique identifier of each 
SFP (from 1 to 8)
INTEGER
GET
fwuRmtSERFOptSFPName
User defined name of each 
Remote SFP.It can be 32 
character long.
DisplayString
SET
fwuRmtSERFOptSFPType
SFP Type-Optical Port Type
OPTICSType
GET
fwuRmtSERFOptSFPColor
SFP wavelength in nanometer.
Integer32
GET
fwuRmtSERFOptRevLaunchPowerMeas
Value of Remote Receive 
measured optical power in 
dbm
DisplayString
GET
fwuRmtSERFOptFwdLaunchPowerMeas
Value of Remote Transmit 
measured optical power in 
dbm
DisplayString
GET
fwuRmtSERFOptMateName
Name of Remote mate
DisplayString
GET
fwuRmtSERFIPEnable
IP Enable mode for Host 
connected to the Remote that 
is carrying RF, where 1 equals 
enable
Integer
GET
fwuRmtSERFOptRxBERFaultThreshold
Threshold Value for declaring 
a Decoded word error state of 
the primary wavelength 
optical receiver (too many 
errors). This is not user 
settable.
DisplayString
SET
fwuRmtSerfOptOverDriveFaultThreshld
Threshold value for declaring 
SFP over drive fault. This is 
not user settable.
Integer32
SET
fwuRmtSerfOptUnderDriveFaultThreshld
Threshold value for declaring 
SFP under drive fault. This is 
not user settable.
Integer32
SET
fwuRmtSERFOptRxBERFaultMask
Trap enable/disable for 
primary wavelength optical 
receiver; trap is enabled by 
default; if disabled, the trap 
will not be raised
MASKType SET
Table 12-2.  FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name
Description
SNMP Syntax
Get 
or 
SET