Microwave Radio Communications LLC PTX127T1CG User Manual
Routine Operation
3-7
PTX-PRO User and Technical Manual
3.5.1
Using the Monitor Screens in COFDM Mode
When the PTX-PRO is operating in the COFDM mode, 70 MHz
COFDM IF output from the internal COFDM/MPEG board is
supplied to the RF output and MONITOR connectors.
COFDM IF output from the internal COFDM/MPEG board is
supplied to the RF output and MONITOR connectors.
for the COFDM Monitor Menu Map.
3.5.2
Using the Monitor Screens in ASI/SDI Input
Mode
When the PTX-PRO is operating in the ASI In mode, the internal
MPEG encoder is bypassed and an externally supplied ASI
stream is routed to the MONITOR and RF output connectors.
MPEG encoder is bypassed and an externally supplied ASI
stream is routed to the MONITOR and RF output connectors.
3.5.3
Using the Monitor Screens in Ext IF Input
Mode
When the PTX-PRO is operating in the Ext. IF In mode, the 70
MHz IF input signal to the SIGNAL INPUT connector is routed
through the transmitter.
MHz IF input signal to the SIGNAL INPUT connector is routed
through the transmitter.
for the Ext.
IF Monitor Map.
3.5.4
Using the Monitor Screens in LMS-T Mode
When the PTX-PRO is operating in the LMS-T mode, this mode
Topic
Page
utilizes a single carrier modulator and supplies a configurable
LMV-S signal to the transmitter RF output and MONITOR
connectors.
LMV-S signal to the transmitter RF output and MONITOR
connectors.
for the LMS-T Monitor
Menu Map.