Microwave Radio Communications LLC PTX127T1CG User Manual
Troubleshooting
4-2
PTX-PRO User and Technical Manual
4.3
Display Messages
One of the ways the PTX-PRO will alert you to problems is by
error messages on the PTX-PRO front panel displays. These are
displayed on the Monitor screens.
error messages on the PTX-PRO front panel displays. These are
displayed on the Monitor screens.
for descriptions of the messages and what to do
when they appear.
Table 4-2: Display Messages
Message
Meaning
Suggested Operator Action
Suggested Technical Staff Action
Not On Chnl
Channel frequencies
defined in the Channel
Plan for that band are not
being recognized.
defined in the Channel
Plan for that band are not
being recognized.
•
Change the channel.
•
Contact technical staff.
•
Use Configurator software to check
settings. Check the Channel Plan to be
sure it is correct. Verify Channel Plan
matches the transmitter settings.
settings. Check the Channel Plan to be
sure it is correct. Verify Channel Plan
matches the transmitter settings.
•
If message persists even when
operating on a frequency that matches
the channel plan, unit may have
suffered internal failure. Call MRC
Technical Support.
operating on a frequency that matches
the channel plan, unit may have
suffered internal failure. Call MRC
Technical Support.
No Video
The PTX-PRO is unable to
lock onto video signal.
lock onto video signal.
•
Check for correct operation mode.
•
Check cable connections to SIGNAL
INPUT and SDI/ASI INPUT connectors.
INPUT and SDI/ASI INPUT connectors.
•
Contact technical staff.
•
Use Configurator software to check
settings.
settings.
•
If message persists, unit may have
suffered internal failure. Call MRC
Technical Support.
suffered internal failure. Call MRC
Technical Support.