Microwave Radio Communications LLC PTX127T1CG User Manual
Advanced Operation
5-5
PTX-PRO User and Technical Manual
5.3.3
Create New Configuration On-Line
The flowchart required to create new Preset configuration settings
and channel plans in the on-line mode is contained in
and channel plans in the on-line mode is contained in
thru
.
Figure 5-2: Create New Configuration On-Line - Sheet 1 of 5
MRC Configurator Icon
Main Page
Radio Control
COM Port Menu
Select COM port
required
required
Connect
Radio Mode,
MPEG, COFDM,
LMS-T, Channel
Plan, and
Licensing tabs
are displayed
MPEG, COFDM,
LMS-T, Channel
Plan, and
Licensing tabs
are displayed
Preset
Operations
Change Preset
Names
Change Preset
Names Menu
Enter Preset
Names (12
characters max)
and select OK
Names (12
characters max)
and select OK
Radio Mode Tab
Back Off (dB)
Enter back off
attenuation for
each Preset, as
required (Valid
range is 0 - 19)
attenuation for
each Preset, as
required (Valid
range is 0 - 19)
Color Bars
Select OFF, ON,
Auto, or Standby
for each COFDM
and LMS-T
Preset, as
required
Auto, or Standby
for each COFDM
and LMS-T
Preset, as
required
IF/CW Tone
Select OFF or
ON for each
COFDM Preset,
as required.
ON for each
COFDM Preset,
as required.
Operation Mode
Select COFDM,
ASI IN, Ext IF In,
or LMS-T for
each Preset, as
required
ASI IN, Ext IF In,
or LMS-T for
each Preset, as
required
A
Remember Last
PA State Check
Box
Select check box,
as required
as required
Note
If the Remember Last PA State option
is selected, the PTX-PRO will return to
the last state it was in when it was
powered down. If the radio was in
standby, it will return to standby upon
power up; if the radio was transmitting, it
will return to the transmitting state upon
is selected, the PTX-PRO will return to
the last state it was in when it was
powered down. If the radio was in
standby, it will return to standby upon
power up; if the radio was transmitting, it
will return to the transmitting state upon
power up.
To