Microwave Radio Communications LLC STATXU064T1CK User Manual

Page of 98
 Product Description
2-7
STRATA TX Operator’s Guide/Tech Ref Manual
2.3
System Components
This section will provide more details about each the 
components of a STRATA TX System:
STRATA  TXU 
STRATA TCU 
STRATA  ACU
STRATA Remote Control Panels
For details on connections between the STRATA TX System 
components, refer to the “Installation” chapter (part of the 
STRATA TX Technical Reference Manual only).
2.3.1
STRATA TXU
The TXU (
) always contains an IF/RF module that 
accepts either a 70 MHz COFDM, FMT IF, or external 70 MHz 
input signal and up-converts these signals to the required RF 
band. The RF frequency synthesizer circuit included in the IF/RF 
unit, in conjunction with the command and control power supply 
module, provides the means to channelize RF video and audio 
signals in the TX System RF band.
The TXU, with either an analog (FMT) or digital (MPEG/COFDM) 
module, is integrated in the same housing as the HPU 
components.  This provides the ability to incorporate high RF 
power output (12 watts of saturated RF power) into a single 
analog or digital transmitter assembly.
Standard U.S. FCC band plans, as well as customer-created 
channel plans, may be customized using the STRATA TX 
Configurator software.
Figure 2-6: STRATA TXU
As noted previously, the TXU may also include either an MPEG/
CODFM or FMT module (but not both), in which case the TXU 
serves as a stand-alone digital or analog video microwave 
transmission system. 
2.3.2
STRATA TCU
The TCU (
) may contain either 
analog or digital or both analog and digital video modulation 
modules.   Where an application might initially employ only 
analog video transmission but expects to migrate to dual, 
switchable, analog and digital operation, the TCU may be 
upgraded to add the MPEG/COFDM module to add this 
capability.