Buffalo 09101938-0 User Manual
WCR-G300 / WCR-HP-G300 User Manual
87
Chapter 6 - Troubleshooting
Cannot connect to the Internet over wired connection.
• Make sure that your AirStation is plugged in!
• Check that the status LEDs of your AirStation are lit as below:
Power
Power
Green LED is on.
Wireless
Green LED on or flashing
Router
Green LED may be on or off
Diag
Off
• Make sure that your computer is set to [obtain an IP address automatically]. See page 102 for more
information.
• Restart your AirStation.
Cannot access the web-based configuration
interface.
• Open the configuration interface by following the procedure on page 23.
interface by following the procedure on page 23.
by following the procedure on page 23.
• Enter the correct user name and password to log in to the configuration interface.
If you are using AirStation with factory default settings, enter “root” (lower case) for the
If you are using AirStation with factory default settings, enter “root” (lower case) for the
username and leave the password blank (enter nothing).
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to [Obtain an IP Address Automatically]. (page 102)
• Restart your AirStation.