Buffalo 000000004 User Manual
34
• If AOSS or WPS connection is not established after 3 minutes, the AirStation will cancel setup and return to nor-
mal.
• Up to 24 wireless devices can be connected with AOSS. Settings configured by AOSS can’t be modified.
To change the settings, either run AOSS again or disable AOSS and configure settings manually.
• AOSS is disabled by default.
• To connect a non-AOSS device to a network configured with AOSS, enter the SSID and key in the device’s settings
• To connect a non-AOSS device to a network configured with AOSS, enter the SSID and key in the device’s settings
manually.
• If SSID 1 is configured, its settings will be used by AOSS configuration. The following security settings will not be
used:
WPA2-PSK AES
WPA2-PSK TKIP
WPA2-PSK TKIP/AES mixed mode
WPA2-PSK AES
WPA2-PSK TKIP
WPA2-PSK TKIP/AES mixed mode
• AOSS can’t be used if the SSID 1 encryption key contains spaces or 64 hexadecimal characters.
WPS
You can make detailed changes to WPS settings here.
Wireless Settings - WPS
WPS
Select whether to enable or disable WPS (Wi-Fi Protected Setup).
AirStation PIN
Displays the PIN code of the AirStation. Click Generate PIN to generate a
new PIN code.
Push-button WPS
Click Start to start WPS.