Buffalo 000000004 User Manual
35
WPS by PIN
After you enter the PIN code and click Start, the internal registrar of the
AirStation waits 2 minutes for the connection request from the enrollee
with the PIN code.
WPS Status
Displays “Configured” or “Not configured”. “Configured” is displayed if all
currently-available wireless bands are configured. “Not configured” is
displayed if any wireless bands are not configured.
SSID
Displays the SSID used in WPS. This is not displayed when the WPS status
is “Not configured”.
Encryption Type
Displays the encryption method used by WPS. This is not displayed when
the WPS status is “Not configured”.
Encryption Key
Displays the encryption key used by WPS. This is not displayed when the
WPS status is “Not configured”.
The setting items for IEEE802.11g and IEEE802.11a are grouped together in this explanation.
Basic
Configure the basic information for wireless LAN here.
Wireless Settings - 802.11g or 802.11a - Basic
Wireless
Select whether to enable or disable wireless LAN.
Band
This is used to set the wireless mode. To set manually, select “User-
defined”. In communication with devices that are set as WDS connection
devices, the transmission speed is determined automatically regardless
of the user-defined setting.
Enable SSID#
Specify enabled number of the SSIDs from SSID1 to SSID5. You may
specify up to 5 SSIDs each for 11g and 11a.