TransCore 05531 User Manual
Encompass 4/4800 Multiprotocol Reader System Guide
8-6
Configuring Parameters with Terminal Emulation
Software
Software
To configure the Encompass 4/4800 Multiprotocol Reader using a PC and terminal
emulation software to manually enter Encompass 4/4800 Multiprotocol Reader host
commands, follow the instructions in the section
emulation software to manually enter Encompass 4/4800 Multiprotocol Reader host
commands, follow the instructions in the section
. Then, enter the appropriate configura-
tion commands through the terminal emulation software on your PC.
See
for a detailed description of all available configuration
commands.
Starting the Terminal Emulation Software
You can use a PC and any terminal emulation software to enter the host commands to
download flash software, configure reader operating parameters, perform diagnostics,
and retrieve tag data. The following procedures show examples using Hyper Termi-
nal™, an application included with Microsoft Windows. Most terminal emulation
applications have a similar sequence for launching.
download flash software, configure reader operating parameters, perform diagnostics,
and retrieve tag data. The following procedures show examples using Hyper Termi-
nal™, an application included with Microsoft Windows. Most terminal emulation
applications have a similar sequence for launching.
To start the terminal emulation software
1.
At the command prompt, type your terminal emulation start command; or if
using Windows Hyper Terminal, select:
Programs>Accessories>Hyperterm
and press ENTER.
using Windows Hyper Terminal, select:
Programs>Accessories>Hyperterm
and press ENTER.
The application displays the Connection Description dialog box as shown in
Figure 8-1 Connection Description Dialog Box