MAXCOM MOBILE 5130S User Manual

With the two cards, you can use the functions of the mobile phone. The SIM card saves the

parameters required by the communication, and personal information, including PIN code

(personal identity number), Contacts, short messages and other system services.

Warning: Do not bend or scratch the SIM card, or contact static, dust or water; if the SIM

card is lost, please contact your network operator.

Please switch off the mobile phone before installing the SIM card. The SIM card is inserted

into the rear side of the mobile phone.

Note: The T-flash card is tiny. Please keep it away from children to avoid swallowed.

If the SIM card is invalid or damaged, the phone displays “Insert SIM card”. Switch off the phone

and take out the SIM card, and then re-insert it into the slot properly.

If the SIM card is damaged, please contact your network operator.

If the SIM card is locked, please contact your network operator.

4.3 Installing memory card

Since the mobile phone doesn’t have enough space, you may need to install a memory card

(T-FLASH card).

To install the T-FLASH card: open the rear cover, take out the battery, insert the T-FLASH

card into the slot, install the battery and then turn on the mobile phone.

To remove the T-FLASH card: open the buckle and take out the T-FLASH card, and then

lock the buckle.

Note: T-Flash card is tiny. Please keep it away from children.

Note: Please select qualified T-FLASH cards, such as SANDISK, V-DATA, and Transcend. Please

match with the mobile phone when you purchase the card.

4.4 Battery and charging

Installing the battery

Only use qualified battery and accessories. When the battery isn’t used, put it in the

protective case.

Note: Please operate according to the figure to avoid damaging the battery contact.

Charging the battery

The new battery will reach its optimized performance after complete charging and

discharging for several times.

Please charge in time when the battery voltage is low. Over discharging will damage the

battery.

Disconnect the charger from the AC power supply and the mobile phone after charging.

While charging, the battery status icon flashes from left to right, and stops flashing after