MAXCOM MOBILE 5130S User Manual
8
charging.
It is normal that the battery becomes warm in the charging process.
Battery status
Your mobile phone can monitor and display the battery status.
1> You can check the battery status from the icon in the upper right corner of the screen.
2> If the electricity is insufficient, the “Low Battery” prompt shows up. The mobile phone sends
warning tone if the “Alert Tone – Warning Tone” in Profiles is activated.
3> During charging, the icon of battery status blinks until the charging completes.
Note: The actual standby time and call time depend on the operation, local network, and settings
of the SIM card and mobile phone.
Using battery
The performance of the battery is affected by various factors, including wireless network
settings, signal intensity, environment temperature, the function or settings that you select,
accessories and the mode of voice, data or other applications that you select.
To keep the battery in optimum performance, please follow the rules below:
The charging of new battery or batteries haven’t been used for long time may be longer;
Keep the battery in room temperature when it is being charged;
Keep the battery in room temperature when it is being charged;
It is normal that the charging time becomes longer after long time using. If the call time
becomes shorter and charging time becomes longer after normal charging, you need to change
a qualified battery. Unqualified battery may damage your phone and cause danger.
If the battery is left unused for too long time or the battery voltage is too low, it takes certain
period of time to display the charging interface normally when the charger is connected.
Note: To protect your safety and the environment, do not dispose the battery randomly.
Warning: The short circuit of battery may cause explosion, fire or body hurt.
Precautions of using battery
1> Switch off the phone before removing the battery.
2> Use the battery carefully. It will cause short circuit to connect the anode (+) and cathode (-) of
the battery with metal objects (coin, clip, etc.), and damage the battery and metal objects.
When the battery is removed and put in the bag, do not contact the anode and cathode of the
battery with metal objects (e.g. keys).
3> Do not put the battery in fire, or use in any place with high temperature.
4> Do not disassemble or refit the battery.
5> Do not put the battery in the place with strong mechanical impact or break through with hard
object.
6> Store the battery in cool and dry place, and avoid high temperature (> 60°C) and direct
sunlight.
7> Stop using if there is any particular smell or overheating.
8> Stop using the battery if there is any crack, distortion or electrolyte leakage.
9> If the electrolyte stains the skin or clothes, please wash with soap and clean water
immediately; the electrolyte enters the eyes, wash with clean water immediately and go to see
the doctor.