Thomson 2-1018A User Manual

4. Press the MUTE/PROG button to confirm and the key tone setting shows

in the display.

This setting may be made with the handsets only. Your dual handsets are
pre-registered and ready to use. It is not recommended that handset be
registered again unless absolutely necessary.

1. If necessary, press the MUTE/PROG button to go to the REGISTRATION

menu. The default is 2 NO.

2. Use the touch-tone pad to select 1 for  YES or 2 for NO. Or use the CID/

VOL (/\ or V) button to scroll to 1  YES or 2 NO.

3. If you select 1 YES, press the MUTE/PROG button to confirm your

selection. HOLD BASE PAGE WAIT FOR BEEP shows in the display.

4. Press and hold the page button on the base unit until you hear a long

tone at the handset. HANDSET X REGISTERED shows in the handset
display, where X is the handset name. You will hear a confirmation tone.

This setting may be made with the handsets only. De-registration
cancels registration. During the de-registration process, keep the
handset near the base.

1. If necessary, press the MUTE/PROG button to scroll to the

DEREGISTRATION menu. The default is 2 NO.

2. Use the touch-tone pad to select 1 for  YES or 2 for NO. Or use the CID/

VOL (/\ or V) button to scroll to 1 YES or 2 NO.

 It is not recommended that a handset be de-registered unless

absolutely  necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.

3. Select NO, if you do not want to de-register.

4.  If you select 1 YES, press the MUTE/PROG button and MOVE NEAR TO

BASE displays for 2 seconds, then CONFIRM? 1 YES 2 NO appears in
the display.