Thomson 2-1018A User Manual

5. Press the touch-tone pad to select 1 YES or 2 NO, or use the CID/VOL (/\

or V) button to scroll to 1 YES or 2 NO.

6. If you select YES, press the MUTE/PROG button to confirm. You will hear

a confirmation tone. Then HANDSET X DEREGISTERED shows in the
display to confirm the handset is deregistered.

 When you complete the de-registration process, HANDSET NEEDS

REGISTRATION shows in the display. To use the handset, you must register
the handset.

If one or more handsets becomes lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to de-register
both handsets at the same time.

 It is not recommended that a handset be de-registered unless

absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.

1. Press and hold the page button on the base until the IN USE/CHARGE

indicator on the base flashes.

2. Press and hold the page button on the base again until the IN USE/

CHARGE indicator on the base flashes rapidly.

3. Press and release the page button on the base once. All handsets are de-

registered and HANDSET NEEDS REGISTRATION shows in the display.

As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings.

1. Press the CID/VOL (/\ or V) button to scroll to the DEFAULT SETTING menu.

2. Press the MUTE/PROG button to enter the menu. DEFAULT SETTING

1YES 2NO shows in the display.

3. Use the touch-tone pad to select 1 YES or 2 NO, or use the CID/VOL (/\ or

V) button to move the cursor to 1 YES or 2 NO. 2 NO is default setting.